manualshive.com logo in svg

Miele KM 5840, Operating And Installation Instructions

Share
Download
Miele KM 5840 Operating And Installation Instructions Download Page 51

Installation

*INSTALLATION*

51

IMPORTANT SAFETY INSTRUCTIONS - INSTALLATION

Risk of damage caused by incorrect installation.

Incorrect installation can damage the cooktop.
The cooktop must only be installed by a qualified specialist.

Risk of electric shock from voltage.

Incorrect connection to the power supply may result in an electric shock.
The cooktop must be connected to the electrical supply by a qualified person
only.

Damage from falling objects.

Take care not to damage the cooktop when installing cabinetry or a ventilation
hood above it.
Install the cabinetry and ventilation hood before installing the cooktop.

 

Reaching over a hot cooktop to access the cabinets can result in

burns. You can reduce the risk of burns by installing a ventilation
hood that extends at least 4 

¾

" (12 cm) past the bottom of the cabi-

nets. Do not install any cabinets above the cooktop.

 

The countertop must be heat-resistant (up to 212°F / 100°C), so

that it does not become deformed or the veneer detached. The wall
strips must be heat-resistant as well.

 

The cooktop must not be installed above refrigerators/freezers,

dishwashers, or washer/dryers.

 

When installing the cooktop, make sure that the power cord can-

not come into contact with hot appliance parts.

 

Ensure that the power cord cannot be touched after the cooktop

has been installed.

 

After the installation of the cooktop, the electrical cord may not

come into contact with any moving kitchen parts (e.g. a drawer) or
be subject to mechanical stress.

 

Observe carefully the safety clearances listed on the following

pages.

Summary of Contents for KM 5840





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands