manualshive.com logo in svg

Miele KM 5840, Operating And Installation Instructions

Share
Download
Miele KM 5840 Operating And Installation Instructions Download Page 48

Frequently Asked Questions

48

Problem

Possible cause and solution

The sensor buttons are
over-sensitive or do not
react at all.

The sensitivity level of the sensor buttons has
changed.

Ensure that the cooktop is not in direct sunlight or
strong artificial light and that the area around the
cooktop is not too dark.

Make sure that there is nothing covering the sen-
sor buttons or the cooktop.
Take any pans off the cooktop and wipe away any
food deposits.

Interrupt the power supply to the cooktop for ap-
prox. 1 minute.

If the problem persists after power is restored,
please contact Miele Service.

In the timer display 



flashes alternately with
numbers.

There is an electronic fault.

Disconnect the power supply to the cooktop for
approx. 1 minute.

If the problem persists after power has been re-
stored, please contact Customer Service.

Summary of Contents for KM 5840





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands