Miele KM 5840, Operating And Installation Instructions

Page: 33 / 68

Timer
33
The cooktop has to be turned on if
you wish to use the timer.
You can set a time between 1 minute
(
 ) and 9 hours ( . ).
The timer can be used for two different
functions:
- For setting the timer
- For turning off a cooking zone auto-
matically.
A time up to 99 minutes is set and dis-
played in minutes.
In case of a time of more than 99 min-
utes, the timer must be switched to
hours (h). The time is set in half-hour
steps. Half-hours are indicated by a dot
following the number, for example, 2 h
30 min:
h
Timer
Setting the minutes
Example: You want to set a time of
15 minutes.
 Make sure the cooktop is switched
on.

Touch the

sensor button.
 appears in the timer display, and the
right  flashes.
First the tens digit is set, then the ones
digit.
 Touch the number sensor which cor-
responds to the tens position (1 in
this case).
The timer display will change and  will
start flashing on the right.

Touch the number sensor which cor-
responds to the ones position (5 in
this case).
The timer display will change.  jumps
to the left and  appears on the right.
After a few seconds, the timer display
will light up continuously. The timer
starts counting down.