Miele KM 5840 Operating And Installation Instructions Download Page 36

Page: 36 / 68

Timer

Using both timer functions at
the same time

The minute minder and automatic
switch-off functions can be used at
the same time.

If you have programmed one or more
switch-off times, and would like to use
the minute minder as well:



Touch the



sensor control repeat-

edly until the indicator lights of the
programmed cooking zones light up
constantly and



appears in the

timer display.



Set the time as described above.

If you have set the minute minder and
would like to program one or more
switch-off times as well:



Touch the



sensor control repeat-

edly until the indicator light for the
cooking zone you require flashes.



Set the time as described above.

Shortly after the last entry, the timer
display switches to the function with the
shortest time left.

If you want to show the times left which
are counting down in the background:



Touch the



sensor control repeat-

edly until

- the indicator light for the required

cooking zone flashes (automatic
switch-off).

- the timer display (minute minder)

starts flashing.

Starting with the shortest time left
which is shown in the display, all
switched-on cooking zones and the
minute minder are shown in a clockwise
direction.

Summary of Contents for KM 5840





































































Search results

Summary of Contents for KM 5840

Reviews:

Brands by name

Popular brands

Miele KM 5840, Operating And Installation Instructions

Search results

Summary of Contents for KM 5840

Reviews:

Brands by name

Popular brands