Electrical connection
52
Disconnecting from the mains
Risk of electric shock.
There is a risk of electric shock if the
hob is connected to the mains sup-
ply during repair or service work.
After disconnection, ensure the ap-
pliance cannot be switched back on
by mistake.
To disconnect the appliance from the
mains power supply, do one of the fol-
lowing depending on installation:
Safety fuses
Completely remove fuses.
Automatic circuit breakers
Press the (red) test button until the
middle (black) button springs out.
Built-in circuit breakers
Circuit breakers at least type B or C:
Switch the lever from 1 (on) to 0 (off).
Residual current device (RCD)
Switch the main switch from 1 (on) to
0 (off) or press the test button.
Replacing the mains connec-
tion cable
Risk of electric shock.
Incorrect connection to the power
supply may result in an electric
shock.
The mains cable must only be re-
placed by a qualified electrician.
When replacing the mains cable only
use cable type H 05 VV-F with a suit-
able cross section. A suitable connec-
tion cable is available to order from
Miele.
Summary of Contents for KM 2356-1
Page 62: ......
Page 64: ...M Nr 11 138 720 00 en GB KM 2356 1 KM 2357 1 ...
