manualshive.com logo in svg

Miele KFNS 37432 iD, Operating And Installation Instructions

Share
Download
Miele KFNS 37432 iD Operating And Installation Instructions Download Page 67

Frequently Asked Questions

67

Other problems

Problem

Possible cause and solution

The door to the freezer
section will not open
because it has been
opened and closed too
many times in succes-
sion.

This is not a fault. The suction caused by opening
and closing the door is preventing the door from
opening. Wait approx. 1 minute and then try again. It
should now open without force.

The floor of the refriger-
ator section is wet.

The drain hole is blocked.

Clean the condensate channel and the drain hole.

There is no acoustic
alarm although the door
has been open for a
long time.

This is not a fault. The alarm tone has been turned off
in settings mode (see “Selecting additional settings -
Acoustic signals”).

The external walls of
the appliance feel
warm.

This is not a fault. The warmth created by the evapo-
rator is used to prevent condensation.

Summary of Contents for KFNS 37432 iD









































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands