manualshive.com logo in svg

Miele KFNS 37432 iD, Operating And Installation Instructions

Share
Download
Miele KFNS 37432 iD Operating And Installation Instructions Download Page 54

Cleaning and care

54

Preparing the appliance for
cleaning

Switch the appliance off.

The display goes out and cooling is
turned off.
If this does not happen, then the safety
lock is still activated (see “Selecting ad-
ditional settings - Activating/deactivat-
ing the lock”).

Unplug the appliance or trip the cir-
cuit breaker.

Take any food out of the appliance
and store it in a cool place.

Remove the door shelf/bottle shelf
from the door.

Take out all other removable parts for
cleaning.

Dismantling the shelves / shelves
with lighting

The stainless steel trim with LED

lighting must not be placed in water.
Clean the stainless steel trim with
LED lighting with a damp cloth.

The stainless steel trim with LED

lighting and stainless steel trim on
the shelves is not suitable for dish-
washers.
Remove the trim before putting the
shelves in the dishwasher.

To remove the stainless steel trim and
the back protective strips, proceed as
follows:

Place the shelf on a soft surface (e.g.
a dish towel) with the top side facing
downwards.

The stainless steel trim with LED

lighting has metal discs (contacts) at
the front left corner which supply
power to the LED lighting.
These can be damaged when the
trim is removed.
Ensure that you always loosen the
other side from the contacts (metal
discs) first.

Summary of Contents for KFNS 37432 iD









































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands