manualshive.com logo in svg

Miele KFNS 37432 iD, Operating And Installation Instructions

Share
Download
Miele KFNS 37432 iD Operating And Installation Instructions Download Page 23

Switching on and off

23

Switching off the appliance

Touch the on/off button.
If this is not possible, the safety lock
is activated.

The temperature shown on the display
will go out and the power supply sym-
bol 

 will appear.

The interior lighting will go out and
cooling will be turned off.

Turning off the refrigerator section
separately

The refrigerator section can be turned
off without having to turn off the freezer
section. This is, for example, useful
when you go on vacation.

Touch the sensor for the refrigerator
section until the yellow light goes out.

Dashes will temporarily appear on the
display.

Turning the refrigerator section back
on again

The refrigerator section can be turned
on separately.

Touch the sensor for the refrigerator
section until the yellow light comes
back on.

The temperature display for the refriger-
ator section will light up. The refrigerator
section will start cooling and the interior
lighting will come on when the door is
opened.

Summary of Contents for KFNS 37432 iD









































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands