manualshive.com logo in svg

Miele KFNS 37432 iD, Operating And Installation Instructions

Share
Download
Miele KFNS 37432 iD Operating And Installation Instructions Download Page 39

Selecting additional settings

39

Turning on Sabbath mode

Touch the Settings sensor.

All symbols available for selection will
appear in the display and the 

 

 sym-

bol flashes.

Touch the sensors for setting the
temperature (

 or 

) repeatedly until

the 

 symbol flashes in the display.

Touch the OK sensor to confirm your
selection.

The last selected setting flashes and
the 

 symbol lights up in the display.

By touching the 

 or 

 sensor you

can now switch on Sabbath mode. To
do this, select the 

1

 setting.

Touch the OK sensor to confirm your
selection.

The selected setting is applied, the 

symbol lights up.

As soon as the 

 symbol goes out in

the display after 3 seconds, Sabbath
mode is switched on.

Turn off Sabbath mode after the Sab-
bath has passed.

Turning off Sabbath mode

Touch the Settings sensor to leave
Sabbath mode.

The temperature will appear in the dis-
play and the interior lighting will come
on.

Carbon filter replacement indi-
cator 

This appliance is not supplied with
carbon filters with a KKF-FF holder
(Active AirClean). The holder is avail-
able as an optional accessory (see
“Accessories – Optional accessories”).

The carbon filter replacement indicator
must be activated once the filters have
been installed.

You will be reminded to replace the fil-
ters after approx. 6 months (see “Clean-
ing and maintenance - Replacing car-
bon filters”). The 

 symbol is illumi-

nated in the display.

After replacing the filter(s), the counter
must be reset. The indicator will then go
out.

Summary of Contents for KFNS 37432 iD









































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands