manualshive.com logo in svg

Miele KFN 37682 iD, Operating And Installation Instructions

Share
Download
Miele KFN 37682 iD Operating And Installation Instructions Download Page 32

Selecting further settings

32

Certain settings on the appliance can

only be selected in settings mode.

When in settings mode, the door

alarm and other fault messages are

automatically deactivated although

the alarm symbol 

 appears in the

display.

Available settings

Activating or deactivating the

safety lock

Switching audible tones on/off

Altering the display brightness

Adjusting the temperature in the

PerfectFresh Pro zone

Switching Sabbath mode on/off

Adjusting the temperature in the

PerfectFresh Pro zone

 is described in

"The correct temperature".
The other further settings are described

in more detail below.

Safety lock 

The safety lock can be activated to pre‐

vent:

– the appliance being switched off by

mistake,

– the temperature being changed by

mistake,

– the Super cool or Super freeze func‐

tions being selected inadvertently,

– settings being adjusted by mistake (it

is only possible to deactivate the

lock).

This prevents the appliance being

switched off or settings adjusted with‐

out your knowledge, by children, for ex‐

ample.

Activating or deactivating the safety

lock

Touch the settings sensor.

All symbols available for selection will

appear in the display and the 

 symbol

flashes.

Touch the OK sensor to confirm your

selection.

The last selected setting flashes and

the 

 symbol lights up in the display.

Summary of Contents for KFN 37682 iD









































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands