manualshive.com logo in svg

Miele KFN 37682 iD, Operating And Installation Instructions

Share
Download
Miele KFN 37682 iD Operating And Installation Instructions Download Page 31

Temperature and door alarm

31

Door alarm

The appliance is fitted with a warning

system to avoid increased energy con‐

sumption and food becoming warm if

the door is left open.
The alarm will sound if the door is left

open for a long time. The alarm sym‐

bol 

 will light up.

The period of time before the door

alarm sounds is 2 minutes (default set‐

ting) or 4 minutes, depending on the

setting selected. The door alarm can al‐

so be switched off (see "Selecting fur‐

ther settings - Audible tones").
The alarm will stop and the alarm sym‐

bol 

 will go out as soon as the door

is closed.

If the audible tone does not sound in

the event of a door alarm, then the au‐

dible tone has been switched off in

settings mode (see "Selecting further

settings - Audible tones").

Switching the door alarm off early

If the noise disturbs you, you can

switch the alarm off if you wish.

Touch the sensor for switching off the

door alarm.

The alarm sound will stop.

The alarm symbol 

 will continue to

be lit up until the door is closed.

Summary of Contents for KFN 37682 iD









































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands