Miele KFN 37682 iD Operating And Installation Instructions Download Page 28

Page: 28 / 104

Using Super cool and Super freeze

Super freeze function

Switch on Super freeze before putting

fresh food into the freezer.
This helps food to freeze quickly and

retain its nutrients, vitamins, flavours

and appearance.

Super freeze is not necessary:

– when placing food in the freezer that

is already frozen.

– when freezing up to 2 kg fresh food

daily.

Switching on Super freeze

When freezing small quantities of food

in the freezer, the Super freeze function

should be switched on

6 hours before‐

hand

. When freezing

the maximum

load of food

, the Super freeze function

should be switched on

24 hours be‐

forehand



Touch the sensor for the freezer sec‐

tion.

The symbol for the freezer section is

highlighted in yellow.



Touch the Super freeze sensor so

that it is highlighted in yellow.

The appliance will work at full power to

lower the temperature in the appliance.

Summary of Contents for KFN 37682 iD









































































































Search results

Summary of Contents for KFN 37682 iD

Reviews:

Brands by name

Popular brands

Miele KFN 37682 iD, Operating And Installation Instructions

Search results

Summary of Contents for KFN 37682 iD

Reviews:

Brands by name

Popular brands