Miele KFN 37682 iD Operating And Installation Instructions Download Page 29

Page: 29 / 104

Using Super cool and Super freeze

Switching off Super freeze

The Super freeze function will switch it‐

self off automatically after approx. 30 -

65 hours. The quantity of fresh food

placed in the freezer will determine the

duration before the Super freeze func‐

tion switches off. The Super freeze



symbol will go out and the appliance

will run at normal power again.
To save energy, the Super freeze func‐

tion can be switched off once a

con‐

stant

temperature of -18 °C is reached

inside the freezer. Check the tempera‐

ture inside the appliance.



Touch the sensor for the freezer sec‐

tion.

The symbol for the freezer section is

highlighted in yellow.



Touch the Super freeze sensor so

that it is no longer highlighted in yel‐

low.

The appliance will continue running at

normal power.

Summary of Contents for KFN 37682 iD









































































































Search results

Summary of Contents for KFN 37682 iD

Reviews:

Brands by name

Popular brands

Miele KFN 37682 iD, Operating And Installation Instructions

Search results

Summary of Contents for KFN 37682 iD

Reviews:

Brands by name

Popular brands