Problem solving guide
77
Message
Cause and remedy
lights up in the
display and an audible
tone also sounds.
There is not enough water in the water container.
Fill the water container with fresh tap water.
The drawer of the ice cube maker is not closed
properly.
Push the drawer all the way in.
The water container is not fitted correctly.
Push the water container into the appliance,
making sure it clicks into position correctly.
lights up in the
display.
The
Replace filter reminder
setting has been
activated. This is the reminder to change the filter
(Active AirClean).
Replace the filter in the holder (see “Cleaning and
care - Replacing the filter”).
Reset the counter (see “Selecting further settings -
Filter replacement indictor
”).
The power failure
symbol
,
appears in
the display and the
alarm tone sounds.
The temperature display
will show the warmest
temperature recorded in
the freezer during a
power failure or an
interruption to the
power supply.
Indication of an
power failure
: the temperature in the
appliance over the last few days or hours has risen
too high because of a power failure or interruption to
the power supply.
The appliance will go back to the last temperature
setting when the power is back on.
Press the Alarm off button.
The warmest temperature displayed will disappear.
The display will then revert to showing the current
temperature in the freezer section.
Depending on the temperature displayed, you
should check whether food in the freezer has
started to thaw or has defrosted. If it has, it should
be used as soon as possible. Defrosted food may
only be re-frozen after it has been cooked.
“
F0
to
F9
” appears in
the display.
There is a fault.
Call the Miele Service Department.
“
FE*
” appears in the
display.
There is a fault.
Call the Miele Service Department.
