Cleaning and care
65
Cleaning the ice-cube tray
Clean the ice-cube tray:
– Before switching off the ice-cube
maker for a long period of time.
– Regularly, to remove ice and water
residues.
If you have previously selected the
setting “Rinse the ice-cube
maker” (see “Rinsing the ice-cube
maker”), the ice-cube tray will already
be in the cleaning position.
The ice-cube tray
cannot be
removed
and must be cleaned in situ.
For this reason the ice-cube tray must
be set to the cleaning position.
Selecting the cleaning position
The setting can only be selected if the
ice-cube maker is switched on.
Empty the ice-cube drawer.
Touch the settings sensor.
All symbols available for selection
appear in the display and the
symbol
flashes.
Touch the buttons for setting the
temperature (
and
) repeatedly
until the ice-cube maker symbol
flashes in the display.
Touch the OK sensor to confirm the
selection.
By touching the
and
buttons,
you can now select the setting you
want:
0
: the ice-cube maker is switched off
1
: the ice-cube maker is switched on
2
: set the water volume
3
:
select the ice-cube tray cleaning
position
4
: rinse the ice-cube maker
Touch the OK sensor to confirm the
selection.
The selected setting will be applied and
you will hear the ice-cube tray rotate
into an angled position.
Wait until the ice-cube tray has
completed this rotation before
continuing.
The ice-cube maker will then switch off.
The symbol for the ice-cube maker
will disappear from the display.
