The correct temperature
29
The following information shows in the
display while the sensors are being
touched:
– Touching a sensor once: the
last
temperature selected
flashes.
– Each subsequent touch of the
sensor: adjusts the temperature
shown in 1 °C steps.
– Leaving a finger on the sensor
changes the temperature
continuously.
Approximately 5 seconds after the last
time a sensor has been touched, the
current
temperature inside the
appliance is automatically shown.
Or
Touch the OK sensor to confirm your
selection.
If you have adjusted the temperature,
wait for approx. 6 hours if the
appliance is not very full and for
approx. 24 hours if the appliance is
full
before checking the temperature
display, as it will take this long for the
appliance to give an accurate reading.
If, after this time, the temperature is
still too high or too low, you will need
to adjust it again.
Temperature range
The temperature can be adjusted:
– in the refrigerator section from 1 °C to
9 °C
– in the freezer section from -15 °C to
-26 °C.
