Cleaning and care
68
Dismantling the adjustable shelf/
adjustable shelf with lighting
Risk of damage as a result of
incorrect cleaning.
The stainless steel trim with LED
lighting will be damaged if you place
it in water for cleaning.
Clean the stainless steel trim with
LED lighting with a damp cloth.
Remove the stainless steel trims or
stainless steel trim with LED lighting
before cleaning the adjustable shelves
in the dishwasher.
To remove the stainless steel trim and
the rear protective strips, proceed as
follows:
Place the adjustable shelf on a soft
surface (e.g. a tea towel) with the top
side facing downward.
Risk of damage as a result of
incorrect handling.
When you remove the stainless steel
trim with LED lighting, the contacts
(metal disc) can be damaged.
These contacts in the front left
corner supply power to the LED
lighting. Ensure that you always
loosen the side on which the
contacts are not located first.
Grasp the plastic surround on the
left-hand side of the stainless steel
trim at its rearmost point.
1. Pull the plastic surround from the
adjustable shelf and
2. pull the trim off at the same time. The
opposite side will also be released.
3. Then pull the protective strip off.
After cleaning, reattach the stainless
steel trim or protective strip by
following the same procedure in
reverse.
