Miele KFN 37232 iD Page 19 Operating And Installation Instructions Download

Page: 19 / 84

Switching on and off

Before first use

Packaging material



Remove all packaging material from
the inside of the appliance.

Protective foil

The stainless steel trim to the interior
shelves and the door shelves has a
layer of protective foil to prevent dam-
age during transportation.



Carefully remove the protective foil
from the stainless steel trim.

Cleaning

Please refer to the relevant instruc-
tions in “Cleaning and care”.



Clean the inside of the appliance and
the accessories.

Accessories

- Bottle holder

The non-slip fins of the bottle holder jut
out into the bottle shelf and make bot-
tles more secure when opening and
closing the appliance door.



Attach the bottle holder along the
center rear edge of the bottle shelf.

Summary of Contents for KFN 37232 iD





















































































Search results

Summary of Contents for KFN 37232 iD

Reviews:

Related manuals for KFN 37232 iD

Brands by name

Popular brands

Miele KFN 37232 iD, Operating And Installation Instructions

Search results

Summary of Contents for KFN 37232 iD

Reviews:

Related manuals for KFN 37232 iD

Brands by name

Popular brands