manualshive.com logo in svg

Miele KFN 37232 iD, Operating And Installation Instructions, Page: 28 / 84

Share
Download
Miele KFN 37232 iD Operating And Installation Instructions Download Page 28

Selecting additional settings

28

Settings mode

Certain settings on the appliance can
only be selected in settings mode.

Activating and deactivating the
safety lock

Setting the temperature display
°C/°F

Settings mode is represented in the dis-
play by the menu symbol 

.

The procedure for accessing settings
mode and for changing settings is de-
scribed below.

Activating and deactivating the safety
lock

The lock can be activated to prevent
the appliance being switched off by
mistake.

– To activate the lock

Press the SuperFreeze button for ap-
prox. 5 seconds.

The menu symbol 

 will light up and 

will start flashing in the display.
Settings mode is now activated.

Press the SuperFreeze button briefly
to access the lock function.



 appears in the display.

Press the SuperFreeze button briefly
to activate the lock.

The lock symbol 

 will light up.

Press the Main On/Off button to exit
Settings mode.

The temperature will appear in the dis-
play.

Summary of Contents for KFN 37232 iD





















































































Reviews:

No comments