Miele KFN 29233 D bb Page 21 Operating And Installation Instructions Download

Page: 21 / 104

Using for the first time

Before using for the first time

Packaging material



Remove all packaging material from
the inside of the appliance.

Protective foil

The stainless steel trim on the interior
shelves and the door shelves has a
layer of protective foil to prevent dam-
age during transportation. The appli-
ance doors and the side panels may
also have protective foil on them.



Do not remove the foil until the appli-
ance has been positioned in its final
location.

Cleaning and care

Please refer to the relevant instruc-
tions in "Cleaning and care".



Clean the inside of the appliance and
the accessories.

Connecting the appliance



Connect the appliance to the electri-
city supply as described in "Electrical
connection".



Standby



will appear in the display.

Summary of Contents for KFN 29233 D bb









































































































Search results

Summary of Contents for KFN 29233 D bb

Reviews:

Related manuals for KFN 29233 D bb

Brands by name

Popular brands

Miele KFN 29233 D bb, Operating And Installation Instructions

Search results

Summary of Contents for KFN 29233 D bb

Reviews:

Related manuals for KFN 29233 D bb

Brands by name

Popular brands