Miele KFN 29233 D bb Page 24 Operating And Installation Instructions Download

Page: 24 / 104

Switching on and off

Switching off

You can switch the appliance off in Set-
tings mode (see "Selecting further set-
tings").



°C

-18



°C

Start screen



Touch















Settings mode



Use the





arrow sensors until



is displayed.













Switching off



Touch



The temperature display goes out and



lights up.

The refrigerator section interior lighting
will go out and the cooling process will
be switched off.



will go out after approx. 10 minutes.

The display goes dark and switches to
energy-saving mode.

Switching off the refrigerator section
separately

The refrigerator section can be
switched off without having to switch
off the freezer section.

Tip:

We recommend using the Holiday

mode function if you are away on holi-
day (see "Selecting further settings -
Switching Holiday mode



on/off"), so

that the appliance operates at lower
power rather than being switched off
completely.

If the Party mode



, DynaCool



Super cool



functions have been

previously selected, these will be
switched off automatically.



°C

-18



°C

Standby



Touch the temperature display in the
field for the refrigerator section.

°C









Refrigerator section display



Touch





until



is displayed.



Touch





Touch

to confirm your entry.

Summary of Contents for KFN 29233 D bb









































































































Search results

Summary of Contents for KFN 29233 D bb

Reviews:

Related manuals for KFN 29233 D bb

Brands by name

Popular brands

Miele KFN 29233 D bb, Operating And Installation Instructions

Search results

Summary of Contents for KFN 29233 D bb

Reviews:

Related manuals for KFN 29233 D bb

Brands by name

Popular brands