Miele KFN 29233 D bb Page 87 Operating And Installation Instructions Download

Page: 87 / 104

Installation



Two people are required for in-

stalling the appliance.



The appliance must be empty

when it is installed.



Move the appliance carefully on

floors that are sensitive to scratching
to prevent damage.

For easier installation there are trans-
port handles on the back at the top
and transport wheels underneath the
appliance.



Prepare the appliance for installation
as close as possible to its intended
installation location.



Connect the appliance to the electri-
city supply as described in "Electrical
connection".



Move the appliance carefully to its in-
tended installation location.



Position the appliance with the wall
spacers (if used) or the back close to
the wall.



The appliance doors could hit

the wall of the room resulting in dam-
age to the doors.
Protect the glass doors by fitting a
felt stopper, for example, to the wall
of the room.

Aligning the appliance



To align the appliance, adjust the
front feet using the spanner supplied

Levelling the appliance door



Ensure

that you unscrew adjustable

foot



from the lower hinge plate un-

til it sits on the floor. Then unscrew
the foot by a further quarter turn.

Summary of Contents for KFN 29233 D bb









































































































Search results

Summary of Contents for KFN 29233 D bb

Reviews:

Related manuals for KFN 29233 D bb

Brands by name

Popular brands

Miele KFN 29233 D bb, Operating And Installation Instructions

Search results

Summary of Contents for KFN 29233 D bb

Reviews:

Related manuals for KFN 29233 D bb

Brands by name

Popular brands