Miele KFN 14842 SD ed/cs Operating And Installation Instructions Download Page 58

Page: 58 / 68

Push hinge pin

up and out from

underneath.

The SoftClose mechanism is now no
longer fixed to the appliance.

Remove panel

Slide SoftClose mechanism bracket

as far as it will go towards the

handle side of the door.

Undo screw

on the SoftClose

mechanism and on the spacer.

Lever out the housing of the
SoftClose mechanism in the middle
with a flat-bladed screwdriver.

Then lever out the housing of the
SoftClose mechanism from its
position at the side of the appliance.

Then place it to one side.

Slide out the spacer from the hinge
side.

Then place it to one side.

Removing the lower door

Close the lower appliance door.

Pull the middle hinge pin

upwards

to remove it.

Carefully lift the door off and place it
to one side.

Pull cover

off.

Unscrew hinge plate

, turn it

through 180° and fit it on the opposite
side.

Turn plastic cover

180° and refit it

in the centre of hinge plate

Refit cover

on the opposite side.

Changing the door hinging

Summary of Contents for KFN 14842 SD ed/cs





































































Search results

Summary of Contents for KFN 14842 SD ed/cs

Reviews:

Related manuals for KFN 14842 SD ed/cs

Brands by name

Popular brands

Miele KFN 14842 SD ed/cs, Operating And Installation Instructions

Search results

Summary of Contents for KFN 14842 SD ed/cs

Reviews:

Related manuals for KFN 14842 SD ed/cs

Brands by name

Popular brands