Miele KFN 14842 SD ed/cs Operating And Installation Instructions Download Page 17

Page: 17 / 68

To switch the sensor tone on/off

The tone which sounds each time a
sensor is touched can be deactivated.

Touch and leave your finger on the

sensor.

At the same time, briefly touch the
On/Off sensor (without letting go of
the

sensor).

Leave your finger on the

sensor for

another 5 seconds until

appears in

the display.

Touch the

sensor repeatedly until

appears in the display.

Touch the On/Off sensor.

By touching the

sensor, you can

now select whether the sensor tone is
switched on or off:

b 0

: Sensor tone is switched off

b 1

: Sensor tone is switched on

–: Return to menu

The old setting lights up, and your
newly selected setting flashes.

Touch the On/Off sensor to confirm
the new setting.

Touch the

sensor repeatedly until

appears in the display.

Touch the On/Off sensor.

You have now left settings mode.

Switching the safety lock on and off

You can secure the appliance against
unwanted switching off with the safety
lock.

Touch and leave your finger on the

sensor.

At the same time, briefly touch the
On/Off sensor (without letting go of
the

sensor).

Leave your finger on the

sensor for

another 5 seconds until

appears in

the display.

Touch the

sensor repeatedly until

appears in the display.

Touch the On/Off sensor.

By touching the

sensor, you can

now select whether the safety lock is
switched on or off:

u 0

: Safety lock is switched off

u 1

: Safety lock is switched on

–: Return to menu

The old setting lights up, and your
newly selected setting flashes.

Touch the On/Off sensor to confirm
the new setting.

Touch the

sensor repeatedly until

appears in the display.

Touch the On/Off sensor.

Switching on and off

Summary of Contents for KFN 14842 SD ed/cs





































































Search results

Summary of Contents for KFN 14842 SD ed/cs

Reviews:

Related manuals for KFN 14842 SD ed/cs

Brands by name

Popular brands

Miele KFN 14842 SD ed/cs, Operating And Installation Instructions

Search results

Summary of Contents for KFN 14842 SD ed/cs

Reviews:

Related manuals for KFN 14842 SD ed/cs

Brands by name

Popular brands