DynamicCooling
When the DynamicCooling function is
not switched on, the natural circulation
of air in the appliance will cause
different temperature zones in the
refrigerator as the cold, heavy air will
sink to the lowest section of the
appliance. You should bear this in mind
when placing food in the appliance
(see "Using the refrigerator efficiently").
However, if you are placing a large
amount of food in the refrigerator at any
one time, it is a good idea to switch on
DynamicCooling. This way you can
distribute the temperature inside the
appliance to all areas more evenly so
that all the food will be chilled to about
the same degree.
The temperature is set as normal with
the temperature control.
DynamicCooling should also be
selected when:
– the ambient temperature in the room
is high (above approx. 33 °C), and
– the room humidity level is high.
Switching on DynamicCooling
^
Select the refrigerator section.
The "Refrigerator" symbol will light up
yellow.
^
Touch the DynamicCooling sensor so
that it is highlighted in yellow.
Switching off DynamicCooling
Because energy consumption with
DynamicCooling activated is higher, it
should be switched off under normal
conditions.
^
Select the refrigerator section.
The "Refrigerator" symbol will light up
yellow.
^
Touch the DynamicCooling sensor so
that it is highlighted in yellow.
The fan for DynamicCooling
switches off whilst the door is open.
Using SuperCool, SuperFreeze and DynamicCooling
26
