manualshive.com logo in svg

Miele KF 2981 Vi, Operating And Installation Instructions, Page: 83 / 136

Share
Download
Miele KF 2981 Vi Operating And Installation Instructions Download Page 83

Selecting additional settings

83

- SuperFrost function

(if previously switched on)

- Ice Maker

(if previously switched on)

You can still select:

- the sensor control for Settings

mode 

 so that 

Sabbath Mode

 can be

switched off

The 

Sabbath Mode

 function will switch it-

self off automatically after approx.
125 hours.

Danger of food poisoning!

Any power failure during Sabbath
Mode will not be shown on the dis-
play. After a power failure, the appli-
ance will restart in Sabbath Mode.
When power is restored, no notifica-
tion of the power failure will appear
on the display.
If there is a power failure during Sab-
bath mode, check the quality of the
food.

Switching on, switching off or
resetting Water Filter Dis-
play 

Depending on the quantity of ice cubes
produced, the Water Filter Display 

will remind you approximately every 6
months that the water filter has to be
replaced (see “Water filter”, section
“Changing the water filter”).

New water filters are avail-able from 
Miele, from your dealer, or

 

via the 

internet.

Summary of Contents for KF 2981 Vi









































































































































Reviews:

No comments