Miele KF 2981 Vi Page 28 Operating And Installation Instructions Download

Page: 28 / 136

Installation

*INSTALLATION*

Before installation



Before installation, remove any ac-
cessories from the back of the appli-
ance.



Check the refrigeration appliance for
damage during transportation.

Do not install a damaged refrigera-
tion appliance.



Check that all parts at the back of the
appliance are unhindered.



To protect the floor during installation,
secure an off-cut of flooring or similar
material to the floor in front of the in-
stallation area.



not

remove the installation aids



from the appliance door. These will
be required later for aligning the ap-
pliance in the building-in niche.



Risk of damage and injury due to

the refrigeration appliance tipping
over.
As soon as you unscrew the brack-
ets that fix the refrigeration appliance
to the pallet, the appliance is no
longer secured.
Due to its weight and size, the refrig-
eration appliance

must be installed

by two people

Summary of Contents for KF 2981 Vi









































































































































Search results

Summary of Contents for KF 2981 Vi

Reviews:

Related manuals for KF 2981 Vi

Brands by name

Popular brands

Miele KF 2981 Vi, Operating And Installation Instructions

Search results

Summary of Contents for KF 2981 Vi

Reviews:

Related manuals for KF 2981 Vi

Brands by name

Popular brands