Miele K 2601 Vi Operating And Installation Instructions Download Page 92

Page: 92 / 116

Adjusting the interior fittings

Removing compartments from
the refrigerator section

The compartments in the refrigerator
section are on telescopic runners, and
can be removed for filling, emptying or
cleaning purposes:



Pull the compartment out a little bit.



Using both hands, grasp the com-
partment frame from below and push
the compartment downwards so that
the rear end disengages and lifts up-
wards.



Pull the compartment forwards to re-
move it.

Then push the telescopic runners
back in to avoid damaging them.

Be careful not to wash out the spe-
cial lubricant in the telescopic run-
ners when cleaning the refrigeration
appliance.
Wipe the telescopic runners with a
damp cloth to clean them.



To reinsert the compartment, position
it on the telescopic runners so that it
clicks into place.

Summary of Contents for K 2601 Vi





















































































































Search results

Summary of Contents for K 2601 Vi

Reviews:

Related manuals for K 2601 Vi

Brands by name

Popular brands

Miele K 2601 Vi, Operating And Installation Instructions

Search results

Summary of Contents for K 2601 Vi

Reviews:

Related manuals for K 2601 Vi

Brands by name

Popular brands