Miele K 2601 Vi Operating And Installation Instructions Download Page 89

Page: 89 / 116

Door alarm

The appliance is fitted with a warning
system to avoid increased energy con-
sumption if the door is left open.

Door alarm

An alarm will sound if the appliance
door has been left open for longer than
2 minutes.
The message

Close the door

will also ap-

pear on the display.

As soon as the appliance door is
closed, the alarm tone will stop and the
message in the display will go out.

Switching the door alarm off early

If the alarm disturbs you, it can be
turned off early.



Touch the

sensor control.

The alarm will stop and the message
will disappear from the display.

After a certain time, the alarm will
sound again and the message will re-
appear on the display until the appli-
ance door has been closed.

Summary of Contents for K 2601 Vi





















































































































Search results

Summary of Contents for K 2601 Vi

Reviews:

Related manuals for K 2601 Vi

Brands by name

Popular brands

Miele K 2601 Vi, Operating And Installation Instructions

Search results

Summary of Contents for K 2601 Vi

Reviews:

Related manuals for K 2601 Vi

Brands by name

Popular brands