Installation
*
I
N
S
T
A
L
L
A
T
I
O
N
*
35
Do
not
remove the installation aids
from the appliance door. These will
be required later for aligning the ap-
pliance in the building-in niche.
Risk of damage and injury due to
the refrigeration appliance tipping
over.
As soon as you unscrew the brack-
ets that fix the refrigeration appliance
to the pallet, the appliance is no
longer secured.
Due to its weight and size, the refri-
geration appliance
must be installed
by two people
.
2
Unscrew the fixing brackets
.
With the help of several people as re-
quired, carefully lift the refrigeration
appliance from the pallet, starting
with the back of the appliance.
Risk of damaging the floor from
the load.
Moving the refrigeration appliance
can cause damage to the floor.
Move the refrigeration appliance
carefully on floors that are sensitive
to scratching.
As soon as you have set the refrigera-
tion appliance upright, you can move it
using the rollers on the bottom.
Preparing the building-in niche
Risk of damage and injury due to
the refrigeration appliance tipping
over.
This refrigeration appliance is very
heavy and can tip forwards when the
doors are open.
The building-in niche must be se-
cured to the wall behind it and/or
above it with several screws. Only
this will prevent the appliance from
tipping over after being installed.
In addition, use the provided anti-tip
brackets to secure the building-in
niche.
The parts required for installation of
the appliance are supplied with the
appliance. The plastic bags supplied
are marked with letters for easy identi-
fication.
Summary of Contents for K 2601 Vi
Page 30: ...Installation I N S T A L L A T I O N 30 K 2801 Vi K 2811 Vi 756 mm 2029 mm 102 132 mm ...
Page 31: ...Installation I N S T A L L A T I O N 31 K 2901 Vi K 2911 Vi 908 mm 2029 mm 102 132 mm ...
Page 114: ......
Page 116: ...M Nr 11 273 020 00 en GB K 2601 Vi K 2611 Vi K 2801 Vi K 2811 Vi K 2901 Vi K 2911 Vi ...
