Sliding the appliance into the
installation space
^
Unscrew the plinth.
^
To protect the corners of the
installation space, attach the
supplied edge protector
a
on both
sides with adhesive tape.
^
Plug the appliance into the power
outlet
b
.
In the case of side-by-side
installations, a separate outlet must
be used for each appliance.
^
To prevent the power cord from
becoming caught:
Tie a piece of string to the middle of
the power cord and feed it forward
under the appliance. When sliding
the appliance in, pull the cable
forward
c
.
^
Carefully slide the appliance into the
space until the height-adjustable
wheels interlock with the anti-tip
brackets
d
.
If resistance is felt when attempting to
slide the appliance into the installation
niche - for example, because the floor
is uneven,
^
Turn the rear adjustable wheels
slightly outward (see "Aligning the
appliance"), then push the appliance
in.
Be careful not to damage the power
cord attached to the floor.
^
Remove the edge protector
a
.
Installing the appliance
47
