Before using for the first time
^
Clean the inside of the appliance and
the accessories with lukewarm water
and a little washing-up liquid, and
then dry with a soft cloth.
Important: To ensure the correct
functioning of the appliance, and
especially if it has been transported
horizontally, let it stand for 8 hours
after transporting it to its final
location before connecting it to the
mains.
Switching the appliance on
^
Open the appliance door.
^
Press the rocker switch.
This switch is located on the right-hand
side underneath the control panel.
This switches all of the zones in the
appliance on or off together.
The appliance will start to cool, and the
interior lighting will come on when the
door is opened.
The access sensor in the control panel
will also light up.
To enable the temperature to get
sufficiently cold inside the
appliance, allow the appliance to
run for a few hours before placing
food in it.
Please note: switching off with the
rocker switch does not disconnect
the appliance from the mains.
Operation
A light touch of the finger on the
sensors is all that is required to operate
this appliance.
Please note:
– A
selectable
sensor is always
highlighted in
white
.
– A
selected
sensor is always
highlighted in
yellow
.
^
Touch the access sensor so that it is
highlighted in yellow.
The sensors for the three zones in the
appliance will now appear in the control
panel: refrigerator zone, upper
MasterFresh drawer and lower
MasterFresh drawer.
Switching on and off
17
Summary of Contents for K 1801 Vi
Page 70: ...70 ...
Page 71: ...71 ...
Page 72: ...Alteration rights reserved 3613 K 1801 Vi K 1811 Vi K 1901 Vi K 1911 Vi M Nr 09 760 830 00 ...