manualshive.com logo in svg

Miele HR 1134-3 AG, Installation Instructions Manual

Share
Download
Miele HR 1134-3 AG Installation Instructions Manual Download Page 7

IMPORTANT SAFETY INSTRUCTIONS

When using the appliance, follow basic safety precautions, including the
following:

Read all instructions before installation and use of the range to prevent
accidents and machine damage.

This range complies with current safety requirements. However,
improper use of the appliance can result in personal injury or
damage to property.

Please read the installation instructions carefully before installing
and connecting the appliance. 
Read the operating instructions before using the range for the first
time. To prevent accidents and damage to the appliance, always
observe both the installation instructions and operating
instructions. Both documents contain important information about
installation, safety, use and maintenance.
Miele cannot be held liable for damage occurring as a result of
non-compliance with the instructions.

Keep these installation instructions and operating instructions in a
safe place and pass them on to any future owner.

7

Summary of Contents for HR 1134-3 AG





























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands