manualshive.com logo in svg

Miele HR 1134-3 AG, Installation Instructions Manual

Share
Download
Miele HR 1134-3 AG Installation Instructions Manual Download Page 2

PRECAUTIONS TO AVOID POSSIBLE EXPOSURE TO
EXCESSIVE MICROWAVE ENERGY

PRECAUTIONS TO AVOID POSSIBLE EXPOSURE TO EXCESSIVE
MICROWAVE ENERGY

(a) Do not attempt to operate this oven with the door open since
open-door operation can result in harmful exposure to microwave
energy. It is important not to defeat or tamper with the safety
interlocks.

(b) Do not place any object between the oven front face and the
door or allow soil or cleaner residue to accumulate on sealing
surfaces.

(c) Do not operate the oven if it is damaged. It is particularly
important that the oven door close properly and that there is no
damage to the: (1) Door (bent), (2) hinges and latches (broken or
loosened), (3) door seals and sealing surfaces.

(d) The oven should not be adjusted or repaired by anyone except
properly qualified service personnel.

2

Summary of Contents for HR 1134-3 AG





























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands