IMPORTANT SAFETY INSTRUCTIONS
- The circuit breakers have been switched off, or
- the fuses of the electrical installation have been completely
removed, or
- the plug (if present) is removed from the outlet. To do this, pull the
plug not the cord.
The oven requires a sufficient supply of cool air for efficient
operation. Make sure that the supply of cool air is not hindered in
any way (e.g., by installing heat insulation strips in the cabinet niche).
In addition, the required supply of cool air must not be excessively
heated by other heat sources.
If the oven is built in behind a cabinet door front, do not close the
cabinet door while the oven is in use. Heat and moisture can build
up behind the cabinet door when closed. This can result in damage
to the oven, cabinet niche, and floor. Leave the cabinet door front
open until the oven has cooled down completely.
The water shut-off valves must be accessible when the appliance
is installed.
The protective sleeve of the water intake hose must not be
damaged or become kinked.
The integrated water protection system offers protection from
water damage, provided the following conditions are met:
- The appliance is properly installed (electric and water).
- A damaged appliance is dangerous. Contact Miele to have it
repaired immediately.
- Turn off the water supply when the appliance is not in use for an
extended period (e.g., vacation).
The water quality must conform to the requirements for drinking
water in the country in which the oven is being used.
10
