Installation
*INSTALLATION*
109
Plumbed water connection
Risk of injury and appliance
damage if appliance is not
connected properly.
Failing to connect the appliance
properly can result in personal injury
and/or material damage.
The appliance may only be
connected to the plumbed water
connection by qualified technicians.
Risk to health and risk of
damage due to contaminated water.
The quality of the incoming water
must conform to the requirements for
drinking water in the country where
the appliance is being used.
Connect the appliance to the water
supply.
Connection to the water supply must
comply with the applicable
regulations in the country where the
appliance is being installed. All units
and systems used to supply water to
the appliance must also comply with
the applicable regulations in the
respective country.
Connect the appliance directly to the
plumbed water supply.
Avoid connecting the appliance to a
water supply in which the water
might stagnate. Otherwise, the flavor
of the food could be impaired.
The appliance must only be
connected to a cold water supply.
The appliance is constructed to comply
with the relevant local and national
safety standards and may be
connected to the water supply without
a non-return valve if national regulations
permit.
The water connection pressure needs
to be between 14.5 and 145 psi (1 and
10 bar). If the pressure is higher than
this, install a pressure reducing valve.
The stainless steel hose provided has a
length of 4' 11" (1.5 m). Longer inlet
hoses are available if necessary. Do not
shorten the hoses.
The total hose length must not exceed
24.5 ft (7.5 m).
A faucet must be provided between the
stainless steel hose and the household
water supply to ensure that the water
supply can be cut off if necessary.
Make sure the faucet remains easily
accessible once the appliance has been
installed.
If the stainless steel hose supplied is
damaged, it must only be replaced
with an original Miele replacement
hose, available from the Miele web
store, Miele Customer Service, or
from your Miele dealer. The hose
must be suitable for supplying
drinking water.
