With the aid of the following guide, minor problems can be easily corrected
without contacting Miele.
If you cannot resolve a problem following these instructions please contact Miele
Service.
,
Do not attempt to open the appliance casing yourself!
Installation, maintenance and repairs may only be carried out by a suitably
qualified and competent person in strict accordance with current national and
local safety regulations.
Repairs and other work by unqualified persons could be dangerous. The
manufacturer cannot be held liable for unauthorised work.
Problem
Possible cause and remedy
The display is dark. – Check whether the time of day display is set so that it
does not show in the display (see "Settings
%
-
P i
").
– Check whether the mains fuse has tripped. If it has not
tripped, contact a qualified electrician or Miele.
The oven does not
heat up.
– Check if the system lock has been activated.
– Check whether the mains fuse has tripped. If it has not
tripped, contact a qualified electrician or Miele.
The time of day or
"
i2:00
" is flashing in
the display.
There has been a power cut.
Confirm the time of day with the OK sensor, or reset the
time. You will have to enter programmed cooking
processes again.
A noise can be
heard after a
cooking
programme.
This is not a fault.The cooling fan continues to operate after
a programme has finished. It switches itself off once the
oven has dropped to a certain temperature.
There are spots like
rust on the catalytic
surfaces.
When roasting on the rack, the circulating air sometimes
picks up spices, which are then deposited on the oven
interior walls. These residues are not removed by catalytic
cleaning, and should be removed while fresh with a mild
solution of hot water and washing-up liquid applied with a
soft brush.
Problem solving guide
55
