Accessories
Baking tray, universal tray and anti-
spash insert
The surface has been treated with
PerfectClean enamel
.
Please refer to the section on
"PerfectClean" for information on
cleaning and care.
Rack, runners
The surface has been treated with
PerfectClean enamel
.
Treat in the same way as other surfaces
coated with PerfectClean. See
"PerfectClean".
Oven interior
Allow the oven to cool down before
cleaning.
Danger of burning
The oven interior should be cleaned
after each use. If this is not done
subsequent soiling from baking and
roasting will become worse and
make cleaning harder. In extreme
cases soiling will be impossible to
remove or even cause damage to
the surface material.
The surface of the oven interior has
been treated with
PerfectClean
enamel
.
Please refer to the section on
"PerfectClean" for information on
cleaning and care.
The removable
back panel
and
side
liners
are coated with a dark grey
catalytic enamel
.
See the cleaning instructions for
"Catalytic enamelled surfaces".
To make cleaning easier you can
– remove the oven door,
– take out the shelf runners,
– remove the catalytic enamelled back
panel,
– lower the top heating/grill element.
Instructions for doing this are given
further on in this section.
Seal and inside of the oven door
Grease desposits on the seal between
the inside of the oven door and the
oven interior can cause it to become
brittle and cracked.
It is best to clean the seal and the
inside of the door after each with a
Miele E-cloth or a clean sponge and a
solution of hot water with a little
washing up liquid. Wipe dry using a
soft cloth.
Cleaning and care
48