Miele H 4541 Operating Instructions Manual Download

Page: 16 / 80

The oven is supplied with the controls pushed in. They
have to be released before the oven can be used.

When the oven is first connected to the mains supply it will
switch on automatically and a welcome message will appear
in the display.

Willkommen

The display will then change to show the language settings
menu.

A tick

will appear next to the currently selected language.

INDSTILLINGER

eština

SPROG

dansk

deutsch (A)

deutsch (CH)

Turn the function selector clockwise until the language you
want is highlighted in the display.

Press the selector gently to confirm your choice.

After selecting the language you will be prompted to set the
clock. If this prompt does not appear, proceed as described
in "Changing the time of day".

: 00

Please set the time of day

When the oven is first switched on the clock will show 12:00
until you have set the correct time.

The factory default setting for the clock is 24 h.

Before using for the first time

Summary of Contents for H 4541

















































































Search results

Summary of Contents for H 4541

Reviews:

Related manuals for H 4541

Brands by name

Popular brands

Miele H 4541, Operating Instructions Manual

Search results

Summary of Contents for H 4541

Reviews:

Related manuals for H 4541

Brands by name

Popular brands