Miele H 4350 Page 39 Operating And Installation Manual Download

Page: 39 / 84

Some of the standard oven settings
(which are set at the factory) have an
alternative which you can select if
required.

See the chart over for a list of these
settings.
The factory default settings are
indicated by a star

Proceed as follows:

Turn the programme selector to the
Light

position.

Press the multi-function selector
gently.

P I

" will appear in the display.

You can make changes to settings ("

P I

to "

P II

").

To do this:

Turn the multi-function selector
clockwise until the required number
is shown in the display. Then press it
gently to confirm your selection.

" appears in the display to let you

know that this setting can be altered.

Turn the multi-function selector until
the required setting is shown in the
display. Then press it gently to
confirm your selection.

The change is then stored in memory.

" will appear in the display again

together with the number for the oven
setting.

You can make changes to further
settings as long as you have not turned
the multi-function selector back to the
"0" position.

The altered settings are retained
after a power cut.

Altering oven settings

Summary of Contents for H 4350





















































































Search results

Summary of Contents for H 4350

Reviews:

Related manuals for H 4350

Brands by name

Popular brands

Miele H 4350, Operating And Installation Manual

Search results

Summary of Contents for H 4350

Reviews:

Related manuals for H 4350

Brands by name

Popular brands