Temperatures, times and other
functions are controlled using two
rotary dials:
Entries made are shown in the display.
To change a setting on the oven:
^
Turn the
programme selector
to the
required position.
^
Then turn the
multi-function
selector
.
All functions which can be set or
changed will appear in the display.
^
Turn the
programme selector
clockwise or anti-clockwise until
triangle
V
is underneath the required
symbol in the display.
^
Press the
multi-function
selector
gently.
The function is now selected and the
triangle
V
underneath required symbol
will start
to flash
.
^
Whilst
the triangle
V
is flashing
,
use the multi-function selector imme-
diately to make any changes.
The triangle
V
will flash for appox. 5
seconds. If this input period has
elapsed you will have to re-select
the function.
^
Press the multi-function selector
gently.
This confirms your selection or any
changes you have made.
This principle applies whenever you
change a setting.
See "Altering the time of day" and
"Using the oven" for examples which
explain this principle in detail.
Note:
– Times entered are automatically
saved after a short period of time
without having to press the
multi-function selector.
– Any changes to settings, however,
have to be confirmed by pressing the
multi-function selector.
Operating sequence
20
Summary of Contents for H 4350
Page 82: ...82 ...
Page 83: ...83 ...
Page 84: ...Alteration rights reserved 22 1607 H 4350 H 4450 M Nr 07 088 030 00 en GB ...