Miele H 4350, Operating And Installation Manual

Page: 26 / 84

Selecting a temperature
U
V
As soon as a cooking function is
selected, a
recommended
temperature will appear in the display.
If you are happy with the recommended
pre-set temperature, the display will
change a few seconds later to show
this as the
target temperature .
The oven will then start heating up.
The display will then change to show
the
actual temperature in the oven,
and depending on which programme is
being used the symbol
p
or
U
will also
show.
The increase in temperature can be
followed in the display until the target
temperature is reached.
If the door is opened or the target
temperature reduced during cooking,
the actual temperature will also go
down in the display.
The following recommended
temperatures are set at the factory:
Fan plus Y . . . . . . . . . . . . . . . . 160 °C
Auto roast
E
* . . . . . . . . . . . . . . 160 °C
Intensive bake
F
. . . . . . . . . . . 170 °C
Conventional
CB
. . . . . . . . . . . 180 °C
Bottom heat
B
. . . . . . . . . . . . . . 190 °C
Fan grill
N
. . . . . . . . . . . . . . . . 200 °C
Grill
m
. . . . . . . . . . . . . . . . . . . . . 240 °C
Grill - full
n
. . . . . . . . . . . . . . . . . 240 °C
Gentle bake x . . . . . . . . . . . . . . 190 °C
* Initial temperature approx. 230 °C,
then drops to 160 °C for continued
roasting
Altering the temperature
If the temperature recommended by the
system is not suitable, it can be altered
according to oven function within the
following range:
Fan plus
Y
. . . . . . . . . . . . 30 – 250 °C
Auto roast
E
. . . . . . . . . . 100 – 230 °C
Intensive bake
F
. . . . . . . 50 – 250 °C
Conventional
CB
. . . . . . . 30 – 280 °C
Bottom heat
B
. . . . . . . . . . 50 – 250 °C
Fan grill N . . . . . . . . . . . . 50 – 260 °C
Grill
m
. . . . . . . . . . . . . . . . 200 – 300 °C
Grill-full
n
. . . . . . . . . . . . . 200 – 300 °C
Gentle bake
x
. . . . . . . . . 100 – 250 °C
To do this:
^
Turn the multi-function selector (right
hand dial) until the triangle is
underneath the
p
or U symbol in the
display.
^
Press the multi-function selector
gently.
The function is now selected and
triangle
V will start flashing.
^
Turn the multi-function selector until
the required temperature shows in
the display.
If you have already entered times for
a programme, you will first have to
call up the
p
or U symbol in the
display before you can alter the
temperature.
Using the oven
26