^
Add rinse aid only until it is visible in
the opening.
The rinse aid reservoir holds approx.
110 ml.
^
Close the flap firmly so that it clicks
into place. Otherwise water can enter
the rinse aid reservoir during a
programme.
^
Wipe up any spilled rinse aid. This
prevents over-foaming occurring
during the next programme.
You can adjust the rinse aid dosage
for best results (see "Settings menu
!
,
Rinse aid").
"Rinse aid low" message
When the
(
Rinse aid low
message
appears, the reservoir contains
sufficient rinse aid for 2-3 programmes
only.
^
Add rinse aid in plenty of time.
^
Confirm with
OK
.
The "Rinse aid low" message will go
out.
If you only ever use combination
products containing salt and rinse
aid in your dishwasher, you can
switch the messages off if you wish
(see "Settings menu - Refill display").
If you switch to using detergent that
does not contain salt or rinse aid, it
is important to remember to
replenish the salt and rinse aid and
to switch the messages back on.
Before using for the first time
32