With the help of the following guide, minor faults in the performance of the
appliance, some of which may result from incorrect operation, can be put right
without contacting the Service Department.
,
Repairs should only be carried out by a suitably qualified and trained
person in strict accordance with current local and national safety regulations.
Unauthorised or incorrect repairs could cause personal injury or damage to the
appliance.
Technical problems
Problem
Possible cause
Remedy
The dishwasher does
not start.
The door is not properly
closed.
Push the door firmly shut.
The appliance is not
plugged in.
Insert the plug and switch on
at the socket.
The mains fuse has
tripped.
Reset the trip switch or
replace the fuse in the plug.
(Minimum fuse rating - see
data plate).
The appliance is not
switched on.
Press the On/Off button
K
and select a programme.
A programme has not
been selected.
Select the programme you
want.
The dishwasher
stops during a
programme.
The mains fuse has
tripped.
– Reset the trip switch or
replace the fuse in the plug
(minimum fuse rating - see
data plate).
– If the mains fuse trips
again, call the Miele Ser-
vice Department.
After the programme
has started, the
In-operation indicator
light is not visible.
The reflector panel was
not correctly fitted.
Re-fit the reflector panel
correctly (see Installation
diagram).
Problem solving guide
59