Turning off the dishwasher
At the end of a program:
^
Press the “On/Off” button (16).
The dishwasher continues to use
electricity until turned off using the
“On/Off” button.
If the dishwasher will not be used for a
period of time, the water valve should
be turned off (e.g. while vacationing).
Interrupting a program
A program is interrupted as soon as the
door is opened.
If the door is closed, the program will
continue from the point it was at before
the door was opened.
Warning:
Water in the dishwasher may be
hot. There is a danger of being
burned! Only open the door if ab-
solutely necessary and exercise
extreme caution when doing so.
Before closing the door, leave it
open for approximately 20 sec-
onds. This will allow the tempera-
ture in the wash cabinet to settle.
Close the door until it clicks into
place.
Changing a program
If you have not yet started the selected
program by pressing the “Start/Stop”
button:
^
Press button (17) for the desired pro-
gram.
^
Select “Delay Start” or “Top Solo”
again if needed (see “Additional fea-
tures”).
^
Press the “Start/Stop” button (22).
The indicator light next to the
“Start/Stop” button goes out. The pro-
gram cycle resumes.
If the selected program is already
running, or if the selected delay start
period has started counting down:
^
Press the “Start/Stop” button (22) for
at least one second. While it is
pressed in the indicator light next to
it will illuminate.
All indicator lights next to the pro-
gram buttons will then come on as
well as the decimal point in the time
display.
^
Press button (17) for the desired pro-
gram.
^
Select “Delay Start” or “Top Solo”
again if needed (see “Additional fea-
tures”).
^
Press the “Start/Stop” button (22).
The indicator light next to the
“Start/Stop” button goes out. The pro-
gram cycle resumes.
Operating the dishwasher
33