Buzzer
The buzzer can be programmed for the following functions:
– Program end = Constant buzzer,
– Fault warning = Buzzer at 1-second intervals, and
– Sample-collection signal = sets of 3 short beeps followed by a 2-sec pause.
Contact Miele Customer Service to program the sample-collection signal.
The numbers shown in the display correspond to the following settings:
20
Buzzer off
21
End of program (factory setting)
22
Error
23
End of p Error
24
Sample-collection signal
25
End of p Sample-collection signal
26
Error + Sample-collection signal
27
End of p Error + Sample-collection signal.
Step
Display / Result
^
Activate the programming mode as per page 35.
^
Press the "Drying"
0
button until E04 appears in the
display.
E04
^
Turn the program selector to the "Wash" program.
21
^
Press or hold down the "Display"
ß
button until the
required value appears in the display, e.g., 26.
26
^
Save to memory and exit programming mode as per
page 35.
Value selected:
The buzzer will sound for 30 sec at the value selected.
To switch it off earlier:
– Turn the program selector to the 12 o'clock position
f
.
– Press the "Display"
ß
button.
– Interrupt the power supply, e.g., open the door.
Programmable functions
44
