Miele G 7835, Operating Instructions Manual

Page: 4 / 52

This machine conforms to current
safety requirements. Inappropriate
use can however lead to personal
injury and property damage. Read
the operating instructions carefully
before starting to use this machine.
Keep these instructions in a safe
place, and make them available to
future users.
Use
This machine is designed for
commercial use and for
specialized applications only, as
described in these Operating
Instructions. Do not use for purposes
other than those for which it was
designed, as this might be dangerous.
The programs are designed for
laboratory glassware which are
declared reprocessable. Regard the
information from the glassware
manufacturer.
Miele is not responsible for damages
caused by improper use.
The installation of this unit in non
stationary locations (e.g. ships)
must be performed by a qualified
installer or service agency, in strict
accordance with national and local
safety regulations and standards.
Please pay attention to the following
notes, to maintain safe procedures.
The machine should be
commissioned and then
maintained only by a Miele Service
Technician. Repairs by unqualified
persons could be dangerous.
Do not install the machine in an
area where a danger of explosion
or freezing may be present.
Be certain this appliance is
properly installed and grounded by
an authorized technician. To guarantee
the electrical safety of this appliance,
continuity must exist between the
appliance and an effective grounding
system. It is imperative that this basic
safety requirement be met. If there is
any doubt, have the electrical system
checked by a qualified technician. The
manufacturer cannot be held
responsible for damage or injury
caused by the lack of or inadequacy of
an effective grounding system (e.g.
electric shock).
A damaged machine is dangerous.
Turn off the machine immediately at
the main switch and call the Miele
Service Department.
Personnel operating the machine
should be trained regularly.
Children and untrained personnel must
not be allowed access to the machine
or its controls.
IMPORTANT SAFETY INSTRUCTIONS
4