Miele G 7835, Operating Instructions Manual

Page: 14 / 52

Filling the salt reservoir
Only special, coarse-grained
reactivation salt* should be used in
this machine.
*Available from Miele’s Professional
Customer Service Department.
Please see back page for more
information.
Do not use other types of salt, e.g. table
salt, agricultural or gritting salt. These
could contain components which are
insoluble in water and could damage
the water softener. If in doubt, consult
Miele’s Professional Department.
The salt reservoir holds approx. 2.5 kg
of salt.
,
Inadvertently filling the salt
reservoir with detergent will damage
the water softener.
Before filling, make sure that you are
using
reactivation salt .
^
Remove the bottom basket from the
machine.
^
Unscrew the salt reservoir cap.
Before filling the salt reservoir with
reactivation salt for the first time fill it
with approx. 2.5 liters of water.
^
Place the funnel provided in place.
^
Carefully fill the reservoir with salt.
Displaced water will run out as it is
being filled.
^
Wipe any residual salt off the screw
threads on the socket.
^
Screw the cap on firmly.
^
Immediately after this step: Run the
"REMOVE SALT" program to remove
any traces of salt from the cabinet.
Note: There may be a delay before the
"REMOVE SALT" program starts due to
the reactivation of the water softener.
Water softener
14