Miele G 7804, Operating Instructions Manual

Page: 36 / 76

Switching on
^
Close the door.
^
Open the stopcocks.
^
Press the I-0 switch.
When the programme selector is at
f
,
a dot lights up in the display.
Selecting a programme
Choose your programme according to
the type of glassware being cleaned
and the degree of soiling.
The different programmes and their
uses are described in the
Programme
chart at the end of this booklet.
^
Turn the programme selector
clockwise or anti-clockwise to the
required programme.
The temperature of the first stage of the
programme selected will appear in the
display, except with
D
and
6
.
The indicator light next to the Start
button
6
will flash.
Selecting the Drying
3
additional
function
The drying additional function may be
selected immediately after the
programme has been selected (except
with Pre-rinse
D
and Drain
6
).
To do this:
^
Press
3
.
The drying phase operates with pulsed
heating for ten minutes. The total
running time of the programme
lengthens accordingly.
Changing a programme
A programme can only be changed if
the Start button
6
has not been
pressed.
^
Turn the programme selector to the
required programme.
^
If necessary, select the drying
additional function by pressing the
3
button.
The indicator light beside the Start
button
6
will flash.
Operation
36