![background image](http://html.mh-extra.com/html/miele/g-6740/g-6740_operating-instructions-manual_234770076.webp)
Frequently Asked Questions
76
With the help of the following guide, minor faults in the performance of the appli-
ance, some of which may result from incorrect operation, can be put right without
contacting Miele Service. This will save time and money.
The following guide may help you to find the reason for a fault, and to correct it.
You should, however, note the following:
Unauthorized or incorrect repairs could cause personal injury or damage to
the appliance.
Repair work to electrical appliances must only be carried out by a suitably qual-
ified and competent person in strict accordance with current local and national
safety regulations. The manufacturer cannot be held liable for unauthorized
work.
Technical problems
Problem
Possible cause and solution
The display remains
dark and the
Start
indi-
cator light is not flash-
ing after the dishwasher
has been turned on with
the
button.
The dishwasher is not plugged in.
Insert the plug.
The circuit breaker has tripped.
Reset the fuse (see data plate for the correct fuse
rating).
The dishwasher stops
during a program.
The circuit breaker has tripped.
Reset the fuse (see data plate for the correct fuse
rating).
If the circuit breaker trips again, contact Miele Ser-
vice.
The time display is
flashing with the door
shut. The program has
not started.
The door has not closed properly, because it had not
been fully opened after the door had been opened
automatically.
Open the door fully so that the door locking pins
retract again.
Then close the door.